Limed Oak Millboard Pool Deck
– In Liss, Hampshire
Project Details
Area
Approximately 90m²
Decking
Millboard Limed Oak
Subframe
Plas-Pro recycled plastic
Application
Swimming pool surround with integrated outdoor shower
The Project:
Our clients already had Millboard decking surrounding their swimming pool, covering an area of approximately 90m².
Although the decking boards themselves had performed well, the original deck had been constructed on a traditional 4-inch timber subframe. Over time, constant exposure to moisture around the swimming pool had caused the timber structure beneath to rot and deteriorate.
The Millboard wasn’t the problem; the decking had effectively outlasted the structure supporting it.
Our brief was therefore to completely rebuild the deck, addressing the problems beneath the surface while also taking the opportunity to improve the overall design and detailing. The redesigned pool area also incorporated an outdoor shower, providing a practical and convenient way to rinse off before and after using the pool.
Starting Again From the Structure Up
We lifted the existing decking and removed the failed timber subframe in its entirety.
For the replacement structure, we chose Plas-Pro recycled plastic beams and posts. In a poolside environment, removing timber from the supporting structure made perfect sense.
Plas-Pro won’t rot in the same way as a traditional timber subframe, giving us a strong and durable foundation on which to construct the new deck.
With the size of decking surrounding the pool, careful setting out was essential. Levels, board positions, joints, edge details and the position of the outdoor shower all needed to work together before installation began.
Designing Out the Rip Cuts
One of the details we’re particularly pleased with on this project isn’t immediately obvious.
Rather than simply following the dimensions of the existing deck, we adjusted the design and dimensions to work with full Millboard board widths.
This allowed us to set out the entire deck without unsightly longitudinal rip cuts.
On a deck of this size, small discrepancies in setting out can quickly become very noticeable. Narrow strips of decking around edges or against features can make an otherwise high-quality installation look compromised.
By considering the dimensions of the Millboard boards at the design stage, we were able to create a much cleaner and more intentional finish.
It’s a relatively small detail, but exactly the type of detail that makes a difference to the finished project.
Limed Oak Millboard
For the finished surface, we installed approximately 90m² of Millboard decking in Limed Oak.
The lighter tones of Limed Oak work particularly well around a swimming pool, creating a contemporary but natural-looking finish that complements both the water and surrounding garden, as well as the existing limestone pool coping.
Millboard also provides the character and texture of timber without the regular staining, oiling and maintenance associated with a traditional timber deck.
Combined with the Plas-Pro subframe underneath, the new deck has been designed as a complete system with long-term performance in mind.
Project Details
Area
Approximately 90m²
Decking
Millboard Limed Oak
Subframe
Plas-Pro recycled plastic
Application
Swimming pool surround with integrated outdoor shower
Arrange a free quotation
Tel: 07595 591 780
Email: alex@ajtlandscaping.co.uk
“We have been delighted with Alex and all the AJT team. Very pleased with the outcome and also the whole project which was smooth-running, competently managed with a great team of people. Well done guys”
Martin Alexander
“AJT Landscaping is a class act! They are not only incredibly skilled at their work, but very personable. The fact that they were a trusted installer of the manufacturer’s product meant that we felt assured from the outset that we were going to get a good result. And we did. We couldn’t be happier with our new Millboard deck. Thank you, AJT.”
Oliver Sussat
“A truly superb customer experience. Alex kept me informed at every stage of the project, and his foreman, Aron, and team were an absolute pleasure to deal with onsite. They were utterly professional, polite and very accommodating throughout. No matter the challenge or ask, they delivered.”
Steve Baker
Scope of Work
Existing Millboard and failed timber
structure lifted
–
Timber subframe completely
removed
–
Deck dimensions redesigned
around full board widths
–
No longitudinal rip cuts throughout
the installation
–
Low maintenance, rot resistant
supporting structure
–
Integrated outdoor shower
–
Carefully detailed pool edges
and perimeter
The Outdoor Shower
The outdoor shower is a practical addition to the pool area, allowing swimmers to rinse off before entering the pool or wash away chlorine afterwards.
Its position was carefully incorporated into the deck design so that it feels like part of the overall layout rather than an afterthought. The surrounding Millboard provides a durable, low-maintenance surface that is well suited to an area regularly exposed to water.
Together with the pool, limestone coping and Limed Oak decking, the shower helps create a more complete and functional outdoor bathing space.
Why the Subframe Matters
It’s very easy to concentrate on the decking board when investing in a new deck.
But this project demonstrates why what you can’t see is every bit as important as what you can.
The previous Millboard had performed well. Ultimately, it was the lifespan of the timber structure beneath it that determined the lifespan of the complete deck.
By replacing the timber with Plas-Pro, we’ve removed the issue that caused the previous structure to fail and created a foundation much better suited to its poolside environment.
The Finished Pool Area
The completed deck provides approximately 90m² of beautifully finished outdoor space surrounding the swimming pool, with an integrated outdoor shower adding extra convenience and functionality.
Limed Oak Millboard gives the area a fresh, contemporary appearance, while careful planning means the board layout feels balanced and deliberate, with no rip cuts anywhere across the deck.
Underneath, the Plas-Pro structure provides the robust foundation needed for such a demanding environment.
For us, this project sums up an important part of our approach to landscaping:
The details you don’t immediately notice are often the ones that make the biggest difference.
From selecting the right subframe to adjusting the design around full board widths and incorporating the outdoor shower into the layout, every element was considered before construction began.
The result isn’t simply a new pool deck. It’s a pool deck that’s been designed and built properly from the structure upwards.
Looking for a premium decking solution for your garden?
Whether you’re creating a new pool surround, entertaining area, garden terrace or outdoor living space, the right design, materials and installation can make all the difference.
AJT Landscaping is an Millboard Advanced Installer, specialising in bespoke Millboard decking design and installation across Liss, Hampshire, Surrey and surrounding areas.
Our experience with Millboard means we can help with everything from the initial design and board layout through to the subframe, installation and finishing details, creating a decking area that looks great and is built to perform for years to come.
If you’re considering a new decking project, we’d be happy to discuss your ideas and help you find the right solution for your garden.
Talk to AJT Landscaping about your decking project →
Tel: 07595 591780
Email: alex@ajtlandscaping.co.uk
Looking for more inspiration?
View our decking projects and gallery →